Accessories
Splashpans and Bats
2-Piece Splashpan 19″ (snap with flaps)
The 2-Piece Splashpan fits both the SHIMPO VL-WHISPER and SHIMPO VL-LITE models. Both pieces of the splash pan remove quickly and easily for cleaning or when throwing larger ware.
*Fits all SHIMPO wheels except RK-2’s, Bantam & Aspire
Part number: AC-001-2VL-A
Suggested Retail Price: $79.00
Two-Piece Splashpan with ClipsFits
RK-Whisper and RK-10 models manufactured after 1981 and all Master Series wheels when fitted with a 12-inch Wheel-head. Both pieces of the splash pan remove quickly and easily for cleaning or when throwing larger ware. Shorter mounting bolts are required for use with our tables. Splashpan dimensions (23”L x 18” W x 5” H / 4.5 lbs).
Part number: KRKC0205011
Suggested Retail Price: $128.00
SW-RKP-027 (One-Piece Small)
Fits all VL-WHISPER, RK-WHISPER, Master Series (fitted with 12-inch wheel-head), RK-10 and some older RK-2 models. Our table may be used together with this pan as an accessory on wheels listed above (except the M-1 which does not fit a table). 19” dia. X 5” H, 4 lbs.
Suggested Retail Price: $115.00
SW-RKP-027L (One-Piece Large)
This pan fits all VL-WHISPER, RK-WHISPER, Master Series wheels except the M-1. 23” dia x 4” H, 4 lbs. The splash pans attach under the wheel-head and do not require removal for cleaning due to their convenient drain plugs. Constructed of durable flex plastic, our one-piece splash pans resists cracking or breaking and clean easily.
Suggested Retail Price: $142.00
SHIMPO ASPIRE Tabletop (One-Piece Splashpan)
One-piece splash pan made exclusively to fit the SHIMPO ASPIRE tabletop potter’s wheel.
Contact your local dealer to order.
Part number: AC-001-1AS
Suggested Retail Price: $35.00
SHIMPO ASPIRE Bats
Bat made exclusively to fit the SHIMPO ASPIRE tabletop potter’s wheel. Bat dimensions 9 ¾”.
Contact your local dealer to order.
Part number: WA-BAT-ASPIRE
Suggested Retail Price: $10.50
Work Tables and Attachments
Small Work Table (16″ L x 21.5″ W / 10 lbs.)
Solid HDPE plastic work tables which quickly attach to the RK Whisper, RK-10 Basic and Super and older RK-2 models as well as Master Series models (except the M1). The smaller table adds approximately two square feet of surface space.
Part number: BPB00165-HW
Suggested Retail Price: $145.00
Compatible with splashpan SW-RKP-027 or AC-001-2VL-A
Large Work Table (15″ L x 44″ W / 20 lbs.)
Solid HDPE plastic work tables which quickly attach to the RK Whisper, RK-10 Basic and Super and older RK-2 models as well as Master Series models (except the M1). The large table adds approximately four square feet of surface space.
Part number: BPB00160P-HW
Suggested Retail Price: $190.00
Compatible with splashpan SW-RKP-027 or AC-001-2VL-A
Work Tables and Attachments
Ball Mill Rack Attachment
The Ball Mill Rack Attachment attaches to most NIDEC-SHIMPO wheels when used with a 12″ wheel-head. This space-saving rack will allow for variable speed milling. The rack accommodates jars from 3″ – ½” to 9″ diameter up to 10″ long.
Part number: BALL-MILL
Suggested Retail Price: $660.00
Jigger Arm Attachment
The Jigger Arm Attachment is made of HEAVY-DUTY cast iron, this adjustable arm assists you in producing jiggered pieces up to 7″ – ½” high and 11″ in diameter and attaches to most NIDEC-SHIMPO wheels, when used with a 12” wheel-head.
Part number: JIG-ARM
Suggested Retail Price: $815.00
Extension Legs
SHIMPO VL-WHISPER Extension Legs
The SHIMPO VL-WHISPER extension legs allow you to throw while standing. The legs are made from heavy gauge, powder coated steel and designed with a curve for extreme stability. This product is solely meant for the VL-Whisper potter’s wheel, and not compatible with any other model. The legs will raise the SHIMPO VL-WHISPER to a height of 35” to 37” in 1” increments. Contact your local NIDEC-SHIMPO dealer to order.
Product number: EXT-LEG-SET-VLW
Suggested Retail Price: $257.00
Hump Mold Throwing System
7.5″ Plaster Plate Hump Mold
The Hump Mold Throwing System fits any NIDEC-SHIMPO potter’s wheels. Contact your local NIDEC-SHIMPO dealer to order.
Product number: WHM7PL
Suggested Retail Price: $22.00
9″ Plaster Plate Hump Mold For Wheel
The Hump Mold Throwing System fits any NIDEC-SHIMPO potter’s wheels. Contact your local NIDEC-SHIMPO dealer to order.
Product number: WHM9PL
Suggested Retail Price: $26.00
7.5″ Plaster Bowl Hump Mold
The Hump Mold Throwing System fits any NIDEC-SHIMPO potter’s wheels. Contact your local NIDEC-SHIMPO dealer to order.
Product number: WHM7BL
Suggested Retail Price: $22.00
Mold Hump Adapter Bat (Fits any SHIMPO Wheel)
The Hump Mold Throwing System fits any NIDEC-SHIMPO potter’s wheels. Contact your local NIDEC-SHIMPO dealer to order.
Product number: WHM-AD-BAT
Suggested Retail Price: $38.00
Pottery Tools
Ox Tongue Tool – GYUBERA
Ox tongue tools are designed in both long and short styles to suit potter’s needs. They can be used for forming the inside of a vessel, outside of a cylinder and even compressing a platter. Ox tongue tools can be purchased individually or as a set.
Product number: WTC-C15-SET (Long Throwing Tongue Set)
Suggested Retail Price: $70.00
Product number: WCT-C15-S-SET (Short Throwing Tongue Set)
Suggested Retail Price: $65.00
Throwing Hook Tool – KIGOTE (Hari gata)
Throwing hooks are used to round out forms while throwing. They can also help to add the final touch of roundness in hard to reach areas of partially closed forms. Throwing hook tools can be purchased individually or as a set.
Product number: TS-C27-SET
Suggested Retail Price: $25.50
Combing Tool – Kigushi
NIDEC-SHIMPO COMBING TOOLS create fabulous consistent texture and can be used for scoring. Combing tools can be purchased individually or as a set.
Product number: WCT-C16-SET-3
Suggested Retail Price: $38.00
Throwing Disc Tool – Kigote (Maru gata)
NIDEC-SHIMPO Throwing Discs are round with a subtle point. These discs will help to compress the bottom or inside of any vessel. Throwing disc tools can be purchased individually.
Product number: TD-C27-7
Suggested Retail Price: Price: $4.75
Pugmill Dies
Assorted Die
NIDEC-SHIMPO Pugmill extruding dies are made of stainless steel and fit any NRA-04, NVA-04S, and NVS-07 pugmill. Contact your local dealer to order.
Part number: P-DIE-ASRT-ASSY
Suggested Retail Price: $68.00
Coil Die
NIDEC-SHIMPO Pugmill extruding dies are made of stainless steel and fit any NRA-04, NVA-04S, and NVS-07 pugmill. Contact your local dealer to order.
Part number: P-DIE-CYL-ASSY
Suggested Retail Price: $68.00
Tile Die
NIDEC-SHIMPO Pugmill extruding dies are made of stainless steel and fit any NRA-04, NVA-04S, and NVS-07 and pugmill. Contact your local dealer to order.
Product number: P-DIE-TL-ASSY
Suggested Retail Price: $68.00
Pugmill Die Set
NIDEC-SHIMPO Pugmill extruding dies are made of stainless steel and fit any NRA-04, NVA-04S, and NVS-07 pugmill. The set includes the Assorted Die P-DIE-ASRT-ASSY, Coil Die P-DIE-CYL-ASSY, and Tile Die P-DIE-TL-ASS. Contact your local dealer to order.
Part number: P-DIE-SET
Suggested Retail: $180.00
Vacuum Pumps
Vacuum Pump and accessory kit (PM-071 Models)
The vacuum pump and accessory kit can be added to your PM-071A or PM-071-LS to convert them to PM-071V and PM-071V-LS. This powerful 1/3 HP pump is compact and easy to attach, operates at the flip of a switch with minimal depreciation of lbs/hour capacity. Contact your local dealer to order.
Vacuum Pump Only
Part number: AVP001A
Suggested Retail Price: $1,370.00
Vacuum Pump Kit (includes vacuum and kit)
Part number: ACC-AV-071-VP
Suggested Retail Price: $1,488.00
Vacuum Pump Accessory Kit
Part number: ACC-AV-071
Suggested Retail Price: $400.00
Kiln Controller
Bartlett Controller
The Bartlett controller offers precise control and many features not available with other controllers. It comes with preset firing profiles, allowing you to fire by simply entering a cone number, as well as the option of user-defined programs. It will hold up to 6 user-defined programs with up to 8 segments in each program. Or as an option you can combine 2 programs to make one complicated program with up to 16 segments in it. The Bartlett controller has one thermocouple for each circuit in the kiln so it is excellent at ensuring even temperature from top to bottom. We still recommend the use of witness cones with all controllers. Those kiln model numbers with a bartlett controller installed are prefixed with a “BX”. For example BX 1822D.
Contact NIDEC-SHIMPO for pricing (800) 237-7079.
Kiln Furniture
Kiln Furniture Kit
Constructed with high alumina, our furniture and posts are extremely durable and can be fired up to cone 11. Available separately or in kits.
Contact NIDEC-SHIMPO for pricing (800) 237-7079.
Porcelain Jars
1-Liter Porcelain Jar
1-Liter Porcelain Jar comes with about 40 balls ranging from ½” – 1″ in diameter (Mixed).
The 1-Liter Porcelain Jar dimensions 5 ¾” D x 8 ” H.
Product number: BMJ-1L
Suggested Retail Price: $250.00
2-Liter Porcelain Jar
2-Liter Porcelain Jar comes with about 60 balls ranging from ¾” – 1 ¼” in diameter (Mixed).
The 2-Liter Porcelain Jar dimensions 7″ D x 9 ½” H.
Product number: BMJ-2L
Suggested Retail Price: $305.00
3-Liter Porcelain Jar
3-Liter Porcelain Jar comes with about 40 balls ranging from 1″ – 1 ¼” in diameter (Mixed).
The 3-Liter Porcelain Jar dimensions 8″ D x 11″ H.
Product number: BMJ-3L
Suggested Retail Price: $530.00
5-Liter Porcelain Jar
5-Liter Porcelain Jar comes with about 60 balls ranging from 1″ – 1 ¼” in diameter (Mixed).
The 5-Liter Porcelain Jar dimensions 9 ½” D x 12 ½” H.
Product number: BMJ-5L
Suggested Retail Price: $605.00
10-Liter Porcelain Jar
10-Liter Porcelain Jar comes with about 120 balls ranging from 1″ – 1 ¼” in diameter (Mixed).
The 10-Liter Porcelain Jar dimensions 12″ D x 14″ H.
Product number: BMJ-10L
Suggested Retail Price: $1,020.00
Hand-held Extruder
Hand-held Extruder
Handheld Extruder includes 5 Dies and 1 Blank made of stainless steel. Contact your local dealer to order.
Part number: H-EXTRD
Suggested Retail Price: $74.00
Set of 5 Dies and 1 Blank for Hand Extruder (Same dies set included with Hand Extruder).
Part number: H-EXTRD-DS
Suggested Retail Price: $16.00
Extruder Die Sets
Hollow Dies Set (for Hand-held Extruder)
The Hollow Die Extruder Set comes with eight dies as shown and the barrel insert to hold the dies in place. Just place the barrel and the hollow die in our hand-held extruder and extrude hollow forms!
Product number: H-EXTRD-HDS
Suggested Retail Price: $52.00
4 IN 1 Extruder Die Set (for Hand-held Extruder)
The 4 IN 1 Extruder die set comes with 9 dies and 1 block out die. Use the block out die to cover three of the four size options on each 4 IN 1 die. Simply place the desired 4 in 1 die with the block out die over it. Insert the two dies into our hand-held extruder and begin extruding.
Part number: H-EXTRD-4IN1
Suggested Retail: $56.00